Skip to content

A complete positioning system

The G2 Topside is connected to the G2 Antenna which must be mounted in the water with direct line of sight to the Locator. A Wi-Fi signal emitted by the internal Web server of the G2 Topside allows the user to track the Locator using the Water Linked Web-based GUI.

With the benefit of an integrated GPS and Inertial Measurement Unit (IMU), the GPS G2 provides absolute GPS position of the Locator, removing the need to integrate additional third-party sensors for accurate navigation.

The G2 system is custom configured at time of order to best fit the specific needs of the user and the target being tracked, as well as whether 100m or 300m operating range is required.

The standard G2 system is supplied with a battery powered U1 Locator allowing the G2 system to be used to track any target (i.e. ROV or Diver) and does not require the Locator to be integrated, just physically attached to the target.

A BlueROV2 G2 system contains a BlueROV2 integration kit resulting in a tightly integrated solution. This solution is mostly used with the A1 Locator, connecting the A1 Locator directly to the G2 Topside through the ROV tether.

Key features

  • Reliable positioning in the most challenging environments (shallow water, inside tanks/ pools, around installations etc.)
  • Omnidirectional 360 degrees operation
  • Locator operates reliability even when close to the surface
  • 100m and 300m range versions available
  • Small size enabling easy mounting
  • On-board user-friendly web-based GUI with comprehensive diagnostic features
  • Water Linked API supplied to allow for custom integration

Downloads / Resources

DOCUMENT / FILE DOWNLOAD LINK
Datasheet - Standard G2 System PDF  
Datasheet - BlueROV2 G2 System PDF  
GUI Demo   URL
User manual   URL
API Protocol Documentation   URL
API Example Code   URL
CE Certificate PDF  
Certificate of Origin PDF  

 

Full specs and prices in our store!

Purchase in store