Skip to content

Never miss a beat (or swim stroke)

The NetInspect system is based on hydro-acoustic communication where the frequency range is adapted to environments with a high degree of noise such as swim bladder in salmon, cavitation and mechanical noise. The communication signals bypass the typical noise common in fish farms to provide you with an accurate, unobstructed positioning.

NetInspect Product Photo

Why NetInspect GPS

  • Exact, real-time position in cage
  • Track of where the ROV/drone or diver are during operation
  • A status- and end report is automatically generated after completed inspection
  • In the system you can continuously mark and comment foreign elements/damages on the net
  • POI (Point of Interest)
  • Safety for new ROV pilots

Technical Specifications

  1. Dimension topside Pelicase (29.6 x 21.2 x 9.6 cm)
    Locator U1  
    Operating temperature - 10 °C to + 60 °C
  2. Range 100 meter diameter
    Ping rate/frequency 2 hz
    Drift Locator ~1m/6h
    Frequency ca. 110 kHz
    Directivity Omnidirectional (360°)
    Operating principle Time of flight, triangulation
    Integrated IMU Yost Labs TSS-NANO
    TDK Invensense ICM-20948
    Integrated GPS uBlox
  3. Input volt

    IEC C13/85-305 VAC
    Power consumption 0.25A at 12V
    Power-on
    current surge
    2.30A at 12V
    Communication WiFi (802.11ac/a/b/g/n)
    Ethernet (100 Mbps)
    Protocols Water Linked API
    User interface Web based GUI (local
    connection) 3D NetClean
    GUI
  4. Input volt Battery, charged with USB-C
    Power consumption 6 hours after GPS-lock
  5. Certificate of conformity (CE) Yes

Interested in knowing more?

Book a meeting about NetInspect