CageSense®
NetInspect GPS
Have you lost track of where you have inspected the net, and lost control of where you are in the cage? CageSense® NetInspect GPS provides overview of where you have been and your position in the cage during inspection. When using a location unit on a ROV or a diver, we communicate with receiver antennas that give a visual status position during inspection.
Never miss a beat (or swim stroke)
The NetInspect system is based on hydro-acoustic communication where the frequency range is adapted to environments with a high degree of noise such as swim bladder in salmon, cavitation and mechanical noise. The communication signals bypass the typical noise common in fish farms to provide you with an accurate, unobstructed positioning.

Why NetInspect GPS
- Exact, real-time position in cage
- Track of where the ROV/drone or diver are during operation
- A status- and end report is automatically generated after completed inspection
- In the system you can continuously mark and comment foreign elements/damages on the net
- POI (Point of Interest)
- Safety for new ROV pilots
Technical Specifications
-
Dimension topside Pelicase (29.6 x 21.2 x 9.6 cm) Locator U1 Operating temperature - 10 °C to + 60 °C -
Range 100 meter diameter Ping rate/frequency 2 hz Drift Locator ~1m/6h Frequency ca. 110 kHz Directivity Omnidirectional (360°) Operating principle Time of flight, triangulation Integrated IMU Yost Labs TSS-NANO
TDK Invensense ICM-20948Integrated GPS uBlox -
Input volt
IEC C13/85-305 VAC Power consumption 0.25A at 12V Power-on
current surge2.30A at 12V Communication WiFi (802.11ac/a/b/g/n)
Ethernet (100 Mbps)Protocols Water Linked API User interface Web based GUI (local
connection) 3D NetClean
GUI -
Input volt Battery, charged with USB-C Power consumption 6 hours after GPS-lock -
Certificate of conformity (CE) Yes